Composite Blade coolness in an amazing looking knife
The Rake is a good-sized folder with show-off Composite Blade technology.
A Composite Blade combines two steels in one blade and enables us to put each steel to work doing what it does best. In this case, we put high-performance Sandvik 14C28N stainless on the spine and most of the blade. With increased nitrogen in the formula, 14C28N provides both good corrosion resistance and high hardness. The cutting edge is high-carbon high-chromium D2 steel. It’s only slightly stain resistant but it provides the razor edge and the easy re-sharpening of high-carbon steel. In time, expect a patina to develop along the edge, which will help protect against corrosion. With the rake-like tines at the Composite Blade joint, the Rake looks cool and is sure to spark plenty of conversations.
But that’s not all it’s got. The Rake is extremely practical, too. Its blade has a big, curved belly for ample slicing and slashing capability. A clipped point preserves piercing power, too. The knife opens quickly and safely thanks to the SpeedSafe assisted opening system. With SpeedSafe, you can smoothly and easily open the blade with one hand, either left or right, using the flipper or built-in thumbstud. This makes it ideal for sporting and work situations in which one-handed opening is easier and safer.
May be used on either manual or assisted opening knives. The “flipper” is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Locks the blade open during use; one side of the knife’s steel “liner,” the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
The user may position the pocketclip for tip-up or tip-down carry on one side and one-position carry on the other.
A blade composed of several types of steel brazed together in a permanent joint; the technology enables Kershaw to use steel known for edge holding on the edge, strength on the spine for the best of both worlds.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
- Made in the USA
- SpeedSafe® assisted opening
- Liner lock
- Flipper and thumbstud
- 3-position (tip-up/tip-down one side; tip-up other) pocketclip
- Steel: D2/Sandvik 14C28N composite, stonewashed finish
- Handle: G-10
- Blade length: 3.4 in. (8.6 cm)
- Closed length: 4.6 in. (11.7 cm)
- Overall length: 8 in. (20.3 cm)
- Weight: 4.8 oz (136.1 g)